PC120ST Control Board
 |
Item#: PC120ST PC Mother Control Board For older versions of S-2000, S-2600, P-125P, P110, P225. Price: $62.00 Instructions for replacing 1. Disconnect Power from the Unit 2. Remove the Screws from the Lid 3. Remove the Lid 4. Disconnect 2 Low Volt Wires from the side of the unit 5. Remove both nuts from the control board 6. Remove both black wires from the control board Black wire from Motor P3 Black wire from P1 7. Remove both Wite wires from control board White wire from P2. White wire from P4. 8. Connect black and white wires to new control board Refer to steps 6 & 7 for wire placement. 9. Replace both control board nuts 10. Connect both low volt wires to board terminals 11. Connect Power to the Unit 12. Test Unit |